Kitchen Cabinet Cost Calculator

Estimate kitchen cabinet cost by linear feet, type, and material.

By Konstantin Iakovlev · Updated April 2026 · Source: HomeAdvisor

Use the Kitchen Cabinet Cost Calculator above to calculate your results. Enter your values and see instant results — all calculations run in your browser.

Disclaimer: This calculator is for informational purposes only and does not constitute tax, financial, or legal advice. Results are estimates based on the information you provide and current rates. Always consult a qualified tax professional or financial advisor for advice specific to your situation.

How It Works

Cabinets usually claim one of the largest slices of a kitchen remodel budget, which makes them worth pricing carefully before any other decision. By weighing linear footage against cabinet type and material, this estimate gives you a working number early enough to plan around rather than react to. That head start is what keeps a renovation from drifting past what you intended to spend.

The engine behind it is a single equation: linear feet of cabinets multiplied by a cost per linear foot that reflects both the cabinet type and the material. Drawing on average 2026 industry data, it spans stock, semi-custom, and custom construction across laminate, MDF, solid wood, and exotic wood. Those per-foot figures fold in basic hardware and installation but leave out complex custom features and demolition.

Your location, the specific manufacturer, and your chosen installer will all shift the actual cost away from the estimate, so read the result as a starting point. Demolition, plumbing, electrical work, and countertops sit outside this cabinet-focused number and need their own line in the budget. Premium materials and custom designs push the per-foot cost up more sharply than most people expect, which is where estimates tend to fall short.

Example: Estimating the Cost for a Mid-Range Kitchen Remodel

  1. 1 A homeowner wants to renovate a kitchen with approximately 25 linear feet of cabinetry. They are considering semi-custom cabinets made from solid wood.
  2. 2 Based on our 2026 data, semi-custom solid wood cabinets typically range from $350 to $650 per linear foot. For a mid-range estimate, we'll use an average of $500 per linear foot. Therefore, the calculation is 25 linear feet * $500/linear foot.
  3. 3 The estimated cost for these cabinets, including basic installation, would be $12,500.
  4. 4 This $12,500 estimate provides a solid starting point for budgeting. The homeowner can now explore different solid wood options or consider slightly less expensive semi-custom materials if they need to adjust their budget, understanding the financial implications of each choice.

Source: HomeAdvisor · Last updated: April 2026

Frequently Asked Questions

How much do new kitchen cabinets cost?
Stock cabinets cost $100-$300 per linear foot installed. Semi-custom cabinets run $200-$600 per linear foot. Custom cabinets cost $500-$1,200+ per linear foot. A typical 20-linear-foot kitchen costs $2,000-$6,000 for stock, $4,000-$12,000 for semi-custom, or $10,000-$24,000 for custom.
Is it cheaper to reface or replace kitchen cabinets?
Refacing costs 40-60% less than replacement, typically $4,000-$10,000 for a standard kitchen. It works well if the cabinet boxes are structurally sound and you want a new look. Replace if boxes are damaged, the layout needs to change, or you want different sizes.
How many linear feet of cabinets are in a typical kitchen?
A small kitchen has 12-15 linear feet of base cabinets. An average kitchen has 20-25 linear feet. A large kitchen has 30+ linear feet. Linear feet measures only the base cabinet runs along the walls, not upper cabinets, which are typically priced separately.

You might also need

Concrete Calculator

Calculate cubic yards of concrete needed for slabs, columns, and footings. See bags needed and estimated cost.

Paint Calculator

Calculate gallons of paint needed for a room. Accounts for doors, windows, and number of coats.

Flooring Calculator

Calculate flooring material needed and cost for hardwood, laminate, vinyl, tile, or carpet.